“Check Bluetooth”
- This message appears when Bluetooth needs to be turned on, connected, or is scanning.
“Scanning for Devices”
- This message appears when Bluetooth is scanning to find the Cap.
“Please put Your Cap Back On”
- This message appears when the Cap has been removed or is not detected by the biosensor.
“Connect to the Internet for more treatments”
- This message appears when the mobile app has not been connected via Wi-Fi or Cellular in more than 7 calendar days to allow data transfer.
“New Firmware Available”
- This message appears when the mobile app has not been connected via Wi-Fi or Cellular in more than 7 calendar days to allow data transfer.
“Firmware Needs to be Updated”
- This message appears when the mobile app has not been connected via Wi-Fi or Cellular in more than 7 calendar days to allow data transfer.
“Firmware Update Successful”
- This message appears if the update was successful.
The following are specific messages that will appear as an alert if the REVIAN app is not performing properly.
“The Cap needs to cool down”
- This message appears – with a temperature warning icon – when the temperature exceeds the maximum allowable operating temperature.
“Battery Low. Treatment not possible.”
- This message appears, with a battery icon, when the battery is too low to perform a treatment and needs to be charged. This can occur prior to or during a treatment.
“Firmware Update Failed.”
- This message appears when there is a problem updating the firmware. The firmware will automatically resolve the problem and attempt to update again.
Comments
0 comments
Please sign in to leave a comment.